Description

This is a probe compatible with many CNC machines, boasting the features most other probes lack:

Magnetic connector – Connect the probe to your tool, collet, or spindle without fiddly alligator clips. The magnet is a strong neodymium magnet that is reinforced to prevent damage even with extensive use.
Indicator light – Easily know that your probe is working with an indicator light right at your finger tips.
JST XH 2.54 plug – This is standard with many machines and prevents plugging the probe in backwards and locks it self in unlike many DuPont connectors that others use.
Extra thin – Don’t loose your work space to probes that are 15mm thick, this probe is on average 1.55mm thin. Yes I said average, each probe is measured before packing and written in the included instructions for you.
Secured wire – Probes are handled a lot so the point where wires are soldered on often break, we have secured ours at the joint with high temp hot glue for a strong bond.
Mounting hole – There is a mounting hole to accept either M5 or M6 bolts for semi-permanent mounting on your machines bed.
Store away on the machine – The larger hole is sized to fit over the head of a M5 bolt which is standard to many machines frames. Simply press on and there is no need to wonder where you left your probe.
2 giant contact pads – There is a large 20mm round pad for when the probe is secured to the bed and you are using automatic tool setting, and a long slender pad for reaching into tight spots between your fixturing.
Access to Gcode Generator – you get access to a Google Doc where you can adjust your probing speeds and distances. Or you can use the probing routines included with some software, we recommend gSender, it is free and robust.
American Product – This probe is designed, assembled, tested, and shipped from Wyoming, USA.